Product specifications

Ordering Information
17
Fast Delivery... Unmatched Technical Support
Product Overview
The (PoE) PD-Switch is a full-featured, 5-port MAC layer 10/100Base-T
switch that extends the range of Ethernet networks, and increases
port density, while being powered via IEEE 802.3af compliant PoE
through its "PD-port" (eliminating the need to run a separate power
line for the device). Ethernet cabling typically runs only 100 meters;
the PD-Switch, extends the outer range of an ethernet network by an
additional 100 meters.
With multiple port configurations, the PD-Switch provides a
variety of port options while increasing port density. PD-Switches
come equipped with one "PD" RJ-45 port and either:
• Four 10/100Base-T RJ-45 data ports
• Three 10/100Base-T RJ-45 data ports and one SFP data port
(rate depends on SFP)
• Two 10/100Base-T RJ-45 data ports and one 100Base-FX fiber
data port
Features
Multi-port switch powered by the IEEE 802.3af
Power Over Ethernet Standard
• PD accepts power from any network device
providing PoE
• Multiple ports increase network port density
Meets a multitude of installation requirements
• SFP and fiber port configurations (optional) for
different network environments
• All RJ-45 ports feature Auto-Cross and Auto
Negotiation
• Port for High Priority traffic
• Available with ST or SC fiber connectors
• Optional single-strand fiber model
Full-Featured Switch
• Broadcast Storm Protection helps control
excessive broadcast traffic
• DiffServ on all ports provides Quality of Service
prioritization
• Far End Fault provides notification of Link Loss on
all fiber ports
• Supports 1916 byte Packet Size
The PD-Switch combines flexible copper and
fiber interface options with port and packet-
based traffic prioritization while extending
network range by utilizing Power over Ethernet
(PoE) technology.
PD-Switch
Auto Cross
Auto
Negotiation
PoE
Application Example
The PD-Switch has been connected to a central (PoE)
PSE-Switch, extending the range of the network and
increasing port density by using a combination of RJ-45
ports and fiber ports.
852-16440
PD-Switch, TX/5, 100 m
852-16441
PD-Switch, TX/4 + SFP, Various
852-16442
PD-Switch, TX/3 + FX-MM850-ST, 2 km
852-16443
PD-Switch, TX/3 + FX-MM850-SC, 2 km
852-16444
PD-Switch, TX/3 + FX-MM1300-ST, 5 km
852-16445
PD-Switch, TX/3 + FX-MM1300-SC, 5 km
852-16446
PD-Switch, TX/3 + FX-SM1310/PLUS-ST, 40 km
852-16447
PD-Switch, TX/3 + FX-SM1310/PLUS-SC, 40 km
852-16448
PD-Switch, TX/3 + FX-SM1310/LONG-ST, 80 km
852-16449
PD-Switch, TX/3 + FX-SM1310/LONG-SC, 80 km
852-16450
PD-Switch, TX/3 + FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
852-16470
PD-Switch, TX/3 + SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
852-16471
PD-Switch, TX/3 + SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
852-16472
PD-Switch, TX/3 + SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
852-16473
PD-Switch, TX/3 + SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
852-16474
PD-Switch, TX/3 + SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
852-16475
PD-Switch, TX/3 + SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Ordering Information
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber and SFP
Connectors:
RJ-45, ST, SC and SFP
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
1.55”H x 4.75”L x 7.31”D ( 3.94 x 12.07 x 18.57 cm)
Power Rating:
36V DC-50V DC, 56mA-40mA
Shipping Weight:
1.8 lbs (0.82 kg)
* PD-Switch
* SFPs Sold Separately