Product specifications

ManualsBrandsB&B Electronics ManualsMedia ConverterMcPC MediaLinX

Ordering Information

Fast Delivery... Unmatched Technical Support

Compact fiber optic CPE for industrial-grade

delivery over fiber, with media conversion,

carrier grade management and line

provisioning capabilities.

Product Overview

The compact IE-MiniFiberLinX-II/LastGasp is one of the most versatile

fiber optic NID devices available on the market today. It provides

point-to-point fiber optic connections with a unique management tool

to monitor the entire link between two locations. IE-MiniFiberLinX-II/

Last Gasp was designed to work with -48 VDC power that is compliant

with the Bellcore GR-499 specification, supporting the minimum and

maximum transient voltages, typically required by transport equipment

used in Telco environments. Additionally, the product offers Last Gasp,

a Trap notification feature that identifies when the power lines are down

or of a possible power supply failure. Other key features include; carrier

grade remote SNMP management, extra tagging using Q-in-Q, and

PoE (Power over Ethernet).

As a copper-to-fiber converter, the IE-MiniFiberLinX-II/LastGasp

supports multiple fiber types including multimode, single-mode, single-

strand fiber (SSF), and Course Wavelength Division Multiplexing

(CWDM) functionality to increase the capacity of existing fiber. It allows

for remote configuration, provides vital alerts to network administrators,

and can manage the CPE and fiber link as a single entity.

Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair

port for data and management, as well as an auxiliary port designed

to function as a serial port (when used with the included adapter), the

IE-MiniFiberLinX-II/LastGasp also offers multiple powering options: AC

power (with included adapter), DC (through a 4-terminal power block),

as well as Power over Ethernet, acting as a Powered Device (PD) to

draw power when connected to 802.3af compliant Power Sourcing

Equipment (PSE).

Features

• Loopback troubleshooting

• Power options: AC, DC and 802.3af Power over

Ethernet (PoE)

• Preserves complete end-to-end fiber connection

integrity

• Includes bi-directional bandwidth control

• Read/write IEEE 802.1Q VLAN-tags

• QoS: IEEE 802.1p-based packet prioritization

(2 queues [high/low] with 8 levels of priority)

• Layer 2 packet switching, store and forward

operation

• Forwarding rate: 14,880pps for 10 Mbps;

148,800pps for 100 Mbps;

• MTU: Supports over-sized packets up to 1536

bytes

• SNMP V1 and V2c compatible

• Managed via Telnet

• IEEE 802.3x Flow Control

• Includes DHCP and TFTP clients

• Supports the Unified Management Agent (UMA)

• IEEE 802.3 10Base-T twisted pair

• IEEE 802.3u 100Base-TX twisted pair

• IEEE 802.3u 100Base-FX or SX fiber

• Supports passive 802.3ah OAM (Operation,

Administration & Management)

IE-MiniFiberLinX-II/LastGasp

Managed Auto Cross

Auto

Negotiation

Fiber Alert

FIBER

LOS

LINK

Link Loss

LOS

Q-in-Q

V-LAN

Tagging

Industrial

Ethernet

UMA

1 IP

Address

SNMP

PoE

Application Example

856-17720

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM850-

ST, (-20°C to +70°C), 2 km

856-17721

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM850-

SC, (-20°C to +70°C), 2 km

856-17722

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM1300-

ST, 5 km

856-17723

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM1300-

SC, 5 km

856-17724

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310-

ST, 10 km

856-17726

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/

PLUS-ST, 30 km

856-17727

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/

PLUS-SC, 30 km

856-17728

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/

LONG-ST, 80 km

856-17729

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/

LONG-SC, 80 km

856-17730

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/

XLONG-SC, 100 km

856-17731

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1550/

LONG-SC, 80 km

856-17732

IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1550/

XLONG-SC, 100 km

Single-Strand Fiber

856-17740