Product specifications

Ordering Information
7
Fast Delivery... Unmatched Technical Support
856-14011
iMcV-FiberLinX-II, TX/FX-MM1300-ST, 5 km
856-14012
iMcV-FiberLinX-II, TX/FX-MM1300-SC, 5 km
856-14015
iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-ST, 40 km
856-14016
iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-SC, 40 km
856-14017
iMcV-FiberLinX-II, TX/FX-SM1310/LONG-ST, 80 km
856-14018
iMcV-FiberLinX-II, TX/FX-SM1310/LONG-SC, 80 km
856-14021
iMcV-FiberLinX-II, TX/FX-SM1550/LONG-SC, 80 km
856-14022
iMcV-FiberLinX-II, TX/FX-SM1550/XLONG-SC,
100 km
Single-Strand Fiber
856-14039
iMcV-FiberLinX-II, TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
856-14040
iMcV-FiberLinX-II, TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km
856-14043
iMcV-FiberLinX-II, TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
856-14044
iMcV-FiberLinX-II, TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
856-14045
iMcV-FiberLinX-II, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
856-14046
iMcV-FiberLinX-II, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
856-14047
iMcV-FiberLinX-II, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
856-14048
iMcV-FiberLinX-II, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
iMcV-FiberLinX-II
Optical demarcation module enabling delivery
of transparent LAN services over fiber with
integrated media conversion, carrier-grade
remote management and line provisioning
capabilities.
Product Overview
The iMcV-FiberLinX-II solution connects two remote networks over fiber
optics and allows administrators to observe both the end-points and
the fiber link between them, as single management entities and not as
separate elements. Host management traffic is not visible to the remote
or customer network nor is access to the customer network required,
guaranteeing end-to-end data integrity.
The iMcV-FiberLinX-II can be configured remotely, can alert
administrators to any potential problems on the long-haul fiber run, can
provide vital information on link condition and can report data traffic
statistics.
The iMcV-FiberLinX-II end points and fiber link can be managed as a
single entity, allowing remote configuration and fault alerts to network
administrators. As a copper-to-fiber media converter, it allows low-cost
copper switches to connect to the fiber line. Offering unparalleled
flexibility, the iMcV-FiberLinX-II supports multiple fiber types including
multi-mode and single-mode as well as single-strand fiber, doubling
the capacity of installed fiber. Coarse Wavelength Division Multiplexing
(CWDM) functionality is also an option.
Features
• Transparency feature allows VLAN/non-VLAN
traffic on the same port
• Provides differential priority
• Set bi-directional bandwidth
• Remotely configure settings
• Last Gasp SNMP trap
• Easy to configure and manage with GUI-based
iView²
• Includes RJ-45 management port
• Manage/monitor fiber traffic
• Includes RMON statistics
• SNMP V1 and V2c compatible
• Supports the Unified Management Agent (UMA)
• Receive vital health information
• Q-in-Q/Extra-Tagging
• Supports 802.3ah OAM (Operation,
Administration & Management)
Managed Auto Cross
Auto
Negotiation
Fiber Alert
FIBER
LOS
X
X
LINK
LINK
Link Loss
X
X
LOS
Q-in-Q
T
TT
V-LAN
Tagging
T
T
T
UMA
1 IP
Address
SNMP
Application Example
When used in pairs, a module configured as
a Host resides at the head-end while another
module, configured as a Remote, installs at
the remote customer location (typically on the
network edge where the customer network
meets the service provider infrastructure).
Using SNMP, the iMcV-FiberLinX-II solution
monitors the entire link and ensures data
integrity while remaining isolated and
completely transparent to the customer LAN.
856-14500
iMcV-FiberLinX-II, TX/SFP, SFP Variable
(requires one SFP/155-ED Module)
856-14501
iMcV-FiberLinX-II, SFP/SFP, SFP Variable
(requires two SFP/155-ED Module)
856-14010
iMcV-FiberLinX-II, TX/TX, 100 m
* iMcV-FiberLinX-II, SFP port(s)
iMcV-FiberLinX-II, TX/TX
iMcV-FiberLinX-II, TX/FX
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber, CWDM fiber and SFP
Connectors:
RJ-45, ST, SC and SFP
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
0° to +160°F (-20° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Power Consumption:
.850mA at 3.3V DC
Shipping Weight:
0.30 lbs (0.11 kg)
Last Gasp
CWDM versions available,
See website for details
Use with Chassis Platform
iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* SFPs Sold Separately