Instruction manual

PCI Version

Installing the McPC MediaLinX (PCI Version)

Offering plug-and-play operation, the McPC MediaLinX comes ready to install,

utilizing power from the PC’s power supply. To install the McPC MediaLinX:

1. Turn off the PC

2. Remove its cover

3. Find an empty PCI slot

4. Align the McPC MediaLinX in the slot

5. Screw the the McPC MediaLinX into the computer casing’s bracket

6. Make sure the McPC MediaLinX does not extend past the edge of the case

7. Attach the keyed mini-power connector to the McPC MediaLinX

8. Attach the male end of the “Y” connector to one of the computer’s standard

size power connectors

9. Replace the cover

10. Attach the cables between the McPC MediaLinX and the devices that will be

connected

Twisted Pair Crossover/Pass-Through Button (PCI Version)

Whether using crossover or straight-through CAT5 twisted pair cabling, the

McPC MediaLinX will support both types of connections with AutoCross, a

feature which automatically selects between a crossover workstation or Pass-

Through connection depending on the connected device.

FX LNK/ACT TX LNK/ACT

LED Indicators (PCI)

Each McPC MediaLinX includes two LEDs, located on the RJ-45 connector.

LED functions are as follows:

FX LNK/ACT

Glows green when a link is established on the fiber port; blinks

green when activity is detected on the fiber port.

TX LNK/ACT

Glows green when a link is established on the copper port;

blinks amber when activity is detected on the copper port.