Quick Start Guide User guide

Getting Started
for I-7000 Series Modules
Date: Jan-08, 2002 Version 1.02 page: 5
After reconfiguring, please click the icon to search again. See
Figure 1-1-4.
Figure 1-1-4. Search the modules.
Every module has the following default factory settings:
•
Address = 0x01
•
Baud rate = 9600
•
Checksum = disabled
See Figure 1-1-5. If the 7000 Utility lists the module-ID “xxxx” in the
information window, congratulations! You have successfully connected the
first module and communicated with it. (Please do not connect more than one
module at a time.)
Figure 1-1-5. Showing the default settings of the module.