Quick Start Guide User guide

Getting Started
for I-7000 Series Modules
Date: Jan-08, 2002 Version 1.02 page: 4
Connect the first module as in Figure 1-1-1. (If needed, replace the I-7012
module with your own and follow the diagram.) Please do not connect more
than one module at a time.
Install the 7000 Utility software from the included CD. Please refer to
chapter 2 of “The 7000 Utility User’s Manual”.
Run the 7000 Utility software to search for the user’s modules.
It will automatically start searching when users run the 7000 Utility. Please
click the icon
to stop it. Refer to Figure 1-1-2.
Figure 1-1-2. Stop searching.
Click the menu item “COM Port” to select the COM port number you are
connecting to. Select the baud rate “9600” and click the “OK” button. Refer to
Figure 1-1-3.
Figure 1-1-3. Selecting the COM port and Baud Rate.