User Guide

56
I-7011, I-7018 User Manual Rev:B1.0
2.34 ~AA1
Description : Reset Module Status
Syntax : ~AA1[CHK](cr)
~ delimiter character
AA address of setting module (00 to FF)
1 command for reset module status
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Command : ~010 Receive : !0104
Read address 01 module status, return 04, host watchdog
timeout flag is set.
Command : ~011 Receive : !01
Reset address 01 module status, return success.
Command : ~010 Receive : !0100
Read address 01 module status, return 00, Module Status is
clear.
Related Command :
Sec.2.32 ~**, Sec.2.33 ~AA0
Related Topic :
Sec.3.2 Module Status, Sec.3.3 Dual Watchdog Operation