User Guide

I-7011, I-7018 User ManualRev:B1.0

2.18 $AAZ(Data)

Description : Set LED Data

Syntax : $AAZ(Data)[CHK](cr)

$ delimiter character

AA address of setting module (00 to FF)

Z command for setting LED data

(Data) data for show on the LED, from -19999. to +19999. The

data need sign, 5 digits and decimal point.

Response : Valid Command : !AA[CHK](cr)

Invalid Command : ?AA[CHK](cr)

Syntax error or communication error may get no re-

sponse.

! delimiter for valid command

? delimiter for invalid command or LED not set to host

control

AA address of response module (00 to FF)

Example :

Command : $01Z+123.45 Receive : !01

Send address 01 LED data +123.45, return success.

Command : $02Z+512.34 Receive : ?02

Send address 02 LED data +512.34, return the LED is not

setting in the host mode.

Related Command :

Sec.2.12 $AA8, Sec2.13 $AA8V

Note : The command is for I-7011D/11PD only