User Guide

I-7011, I-7018 User Manual Rev:B1.0

2.5 $AA0

Description : Perform Span Calibration

Syntax : $AA0[CHK](cr)

$ delimiter character

AA address of setting module (00 to FF)

0 command for performing span calibration

Response : Valid Command : !AA[CHK](cr)

Invalid Command : ?AA[CHK](cr)

Syntax error or communication error may get no re-

sponse.

! delimiter for valid command

? delimiter for invalid command or the calibration is not

enabled

AA address of response module(00 to FF)

Example :

Command : $010 Receive : !01

Perform address 01 span calibration, return success.

Command : $020 Receive : ?02

Perform address 02 span calibration, return the calibration is

not enabled before perform calibration command.

Related Command :

Sec.2.6 $AA1, Sec.2.20 ~AAEV