Owner manual

www . bb - elec . com |
Heavy Industrial RS-232/422/485
to Fiber Optic Converters
FOSTCDRI-PH-MC, FOSTCDRI-PH-MT, FOSTCDRI-PH-SC
The FOSTCDRI-PH-xx series are premium heavy industrial serial to fiber
optic converters. Designed for rugged industrial environments, they have
been put through most exacting compliance testing in the industry. Meeting
IEC 61850-3 and IEEE 1613 requirements, they are suitable for installation
in electrical substations. These specifications are more stringent than the
NEMA TS1/TS2 requirements for transportation applications. Powerful
isolation protects equipment and data from damaging ground loops and
surges. Additional isolation on the power supply circuits adds a third degree
of protection.
Packaged in a rugged IP30 metal case, these converters convert serial
signals to multi-mode or single-mode fiber optic. Bit-wise enabled circuitry
automatically detects the data rate without setting a DIP switch.
In addition to direct point-to-point connectivity, operation in multi-drop
mode is possible. This enables serial devices to communicate with up to
31 others in a fiber ring. Supporting mixed standards, you can replace
other converters and add the EMI / RFI protection inherent to fiber optic
communications.
• IEEE-61850-3,IEEE-1613
• NEMATS2(FOSTCDRI-PH-MT)
• MultiorSingleMode,STorSCVersions
• -40to85°COperatingTemperature
• Rugged,IP30MetalPanelMountCase
• 50GShock,4GVibration
• 2kVTripleIsolation
PRODUCT FEATURES
ACCESSORIES
MDR-40-24 - DIN Rail Mount Power Supply 24VDC, 1.7 A output power
DRAD35 - DIN Rail Mounting Kit 35mm
ORDERING INFORMATION
MODEL NUMBER DESCRIPTION
FOSTCDRI-PH-MC Serial to Multi-mode SC Converter
FOSTCDRI-PH-MT Serial to Multi-mode ST Converter
FOSTCDRI-PH-SC Serial to Single-mode SC Converter
FOSTCDRI-PH-xx_3713ds