Technical data

Using Telnet
Navigating the Configuration Menu
There are six Telnet screens: Server, Network, Serial Mode, Operation,
Monitor and Configuration. Tab, Back Space and arrow keys can be used
to highlight the desired function on the screen list. Pressing
Enter moves the
cursor to the first field with the current screen. The configuration fields can
be changed by pressing Enter and selecting from the list that appears. The
Escape key moves the cursor back to the screen list. Pressing the Space Bar
refreshes the page.
Figure 44. Telnet Configuration Screens
Manual Documentation Number: ESR90x-1705m Chapter 11 63
B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Using Telnet
Step 7: Once all the changes have been made move to the
Save field and
select
Enter. The restart message will appear.
Figure 45. Saving and Restarting the Configuration
Step 8: Select Yes to save changes. This is necessary to write the settings to
the server. The Telnet window will disappear.
Step 9: To view the changes re-enter
Telnet and re-establish
communications. The configuration menu will appear and display
the current settings.
64 Chapter 11 Manual Documentation Number: ESR904-0504
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com