Technical data

Server Properties Configuration
36 Chapter 5 Manual Documentation Number: ESP904-4513m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
After that port has been updated you may want to re-enter Server Properties
to verify the changes have taken effect, or to view/change the configuration
of other ports. Each port must be configured separately.
Saving Configuration Data in Console Mode or Telnet
Saving (updating) server properties is done from the Configuration screen.
Access the Configuration screen by tabbing through the list of screens on the
left side of the window and highlighting Configuration.
There are four options shown on the right side of the Configuration screen:
Save, Default, Running and Reset. Use Tab, Backspace, or arrow keys to
move the cursor to the option position, and then press Enter.
Figure 34. Console Mode and Telnet Configuration Screens
 Save stores the configuration data to the Serial Server flash memory
and resets it.
 Default restores the configuration data to factory default settings.
 Running restores the configuration data to the last values stored in the
flash memory.
 Reset re-boots the Serial Server, making it available for a client
connection.