Technical data

Using ESP Manager
Manual Documentation Number: ESP904-4513m Chapter 4 23
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Figure 19. The Search Setup Window
Step 5: Enter the IP Address assigned to the ESP904 or click Search all
reachable servers, then OK. IP Address is used to find ESP904
units that are not on the same subnet. (Routers on the network will
block the standard broadcast used to find servers if Search all
reachable servers is selected.) The user must set an IP address that
conforms to the LAN addressing scheme.
The Searching window is shown until all active
ESP901/ESP902/ESP904 serial servers on the LAN are listed in the
Serial Server List window.
Figure 20. The Search VLINX ESP Dialogue Box
Configure Server Properties
Step 6: The Server Properties window displays the current configuration properties
for the currently selected server.
To open the Server Properties window, highlight the serial server in the
Serial Server List window, double-click to open.