Manual

Physical Media
Standard PCB Board Receptacle
Part Number Description
ENSR1FB5 Receptacle with PC Board
ENSR1FB5C305 Receptacle with PCB & 12” of cable (10 Base-T)
ENSR2FB5C305 Receptacle with PCB & 12” of cable (568A)
ENSR3FB5C305 Receptacle with PCB & 12” of cable (568B)
Highly flexible solution that enables an OEM or end-user to solder a cable lead
to an internal Ethernet connection
O-Ring Material Nitrile Rubber
Receptacle Shell Material Acrylonitrile-
Butadiene-Styrene (ABS)—standard
version, Acrylonitrile-Styrene-Acrylate
(Luran™ S778 T/TE)—UV stabilized
version
Knockout Hole for Receptacle 1.031
Mating Thread UNC 1” - 14
Operating Temperature -20 to 80 C
Return Loss 5 dB @ 100 MHZ
Shock/Vibration Per IEC 60068-2-6
Environmental Rating IEC IP67
Receptacles (continued)
Bulkhead Passthrough
To bring Ethernet into a cabinet or control box, simply create the sealed
connection on the outside of the enclosure, and run a commercial patch cord
from the backside RJ-45 jack to your PLC, I/O, or Ethernet Control Board. No
conduit entry is required. UV stabilized versions for outdoor use can be
ordered by adding a "V" to the end of a part number
Part Number Description
ENSP1F5 RJ-45 Bulkhead passthrough with backside jack
ENSP1F5C305 RJ-45 Bulkhead passthrough with 12” of patch cord
ENSP6F5 RJ11 Bulkhead passthrough with backside jack
TIA/EIA Rating
110 Punchdown Category 5e compliant
Bulkhead Passthrough Category 5e
compliant
Direct PCB Mount Category 5 compliant
Standard PC Board Not Rated—additional
customer termination
is required
RJ-45 Jack
Base Material Copper alloy w/30 m-inches
gold alloy
Underplating 2.54 microns of nickel
Mating Cycles 250, minimum
Current Rating 1.5 Amp
Voltage Rating 125 VDC
Receptacle Specifications