User guide

International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]
[e-mail]
[e-mail]
Industrial PoE Ethernet Extender
EIRP-EXTEND
SPECIFICATIONS
TECHNOLOGY
Standards: 802.3 10BaseT
802.3u 100BaseTx
802.3x
Ethernet over VDSL
Protocol Transparent to higher level
Protocols
Processing Half-duplex: back pressure
Full-duplex: 802.3x
POWER
Input Voltage 48 VDC – Power Jack
24 - 48 VDC Terminal Block
Power Consumption 38.4 W Max, 0.8A@48VDC
MECHANICAL
Case DIN Mount IP30 Aluminum
Dimensions
50 mm (W) x 110 mm (D) x 135 mm (H)
1.97” (W) x 4.33” (D) x 5.31” (H))
Weight 0.8 kg (1.76 lbs)
ETHERNET INTERFACE
Ports PoE RJ-45, 10/100BaseTX
Full/Half Duplex
Auto-Negotiation
Auto-MDI/MDX
PoE Plus Complies with IEEE802.3af / 802.3at standard
Speed 10/100 Mbps
Distance 320 ft. (100 m)
Cable 100Base-TX UTPCAT 5 (4 pair)
EXTENDER INTERFACE
Port One RJ-11 or Terminal Block
Speed Up to 50 Mbps
Distance Up to 6,232 ft. (1.9 km)
Cable
24 AWG Copper Pair (0.5mm diameter, 1 pair wire)
or larger 100 Ohm impedance
ENVIRONMENT
Operating Temperature -40 to 75° C
Tested to 85° C
Storage Temperature -40 to 85° C
Operating Humidity 5% to 95% Non-condensing
LED CHART
1
Green 1 Mbps 6232 ft. (1.9 km)
Amber 3 Mbps 5904 ft. (1.8 km)
2
Green 5 Mbps 5249 ft. (1.6 km)
Amber 10 Mbps 4593 ft. (1.4 km)
3
Green 15 Mbps 3936 ft. (1.2 km)
Amber 20 Mbps 3280 ft. (1.0 km)
4
Green 25 Mbps 2624 ft. (0.8 km)
Amber 30 Mbps 2296 ft. (0.7 km)
5
Green 40 Mbps 1968 ft. (0.6 km)
Amber 50 Mbps 984 ft. (0.3 km)
REGULATORY APPROVALS
ISO Manufactured in an ISO9001 facility
Safety UL508
EMI
•FCCPart15,ClassA
•EN61000-6-4
•EN55022
•EN61000-3-2
•EN61000-3-3
EMS
EN61000-6-2
•EN61000-4-2(ESDStandards)
- Contact: + / - 4KV; Criteria B
- Air: + / - 8KV; Criteria B
•EN61000-4-3(RadiatedRFIStandards)
- 10V/m, 80 to 1000MHz; 80% AM Criteria A
•EN61000-4-4(BurstStandards)
- Signal Ports: + / - 4KV; Criteria B
- D.C. Power Ports: + / - 4KV; Criteria B
•EN61000-4-5(SurgeStandards)
- Signal Ports: + / - 1KV; Line-to-Line; Criteria B
- D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
•EN61000-4-6(InducedRFIStandards)
- Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM
- Criteria A
•EN61000-4-8(MagneticFieldStandards)
- 30A/m @ 50, 60Hz; Criteria A
Environmental
Test Compliance
•IEC60068-2-6Fc(VibrationResistance)
- 5g @ 10 - 150Hz, Amplitude 0.35mm
(Operation/Storage/Transport)
•IEC60068-2-27Ea(Shock)
- 25g @ 11ms (Half-Sine Shock Pulse; Operation)
- 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
•IEC60068-2-32Ed(FreeFall)
- 1M (3.281ft.)
Installation:
•DINRail(35mm)PanelMount,RackMountingwithoptionalkit.