User manual

80
Manual Documentation Number: EIR618-2SFP-T_4812m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
5. Select the ports to join the trunk group. The system allows four ports
maximum to be aggregated in a trunk group. Click
Add
button to
add the port which is focused to the left field. To remove unwanted
ports, select the port and click
Remove
button.
6. When LACP enabled, you can configure LACP Active/Passive status
for each port on State Activity page.
7. Click
Apply
button.
8. Use
Delete
button to delete Trunk Group. Select the Group ID and
click
Delete
button.
Port Trunk—Aggregator Setting interface (four ports are added to the left field with LACP
enabled)
Aggregator Information
When you have setup the aggregator setting with LACP disabled, you will