Elinx Managed Ethernet Switch Quick Start Guide

EIR610 Series-5107qsg
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax [phone] www.bb-elec.com
[e-mail] [e-mail]
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
[phone] Fax [phone]
www.bb-europe
.com [e-mail] [e-mail]
IP Configuration
User Name and Password
76
o Expand the “system tree” and select IP configuration.
o Enter the IP Address, Subnet Mask, and Gateway
provided by your Network Administrator.
o Save changes.
o Disconnect the stand alone PC and connect the switch
to the network.
o Inform your Network Administrator that the IP Address
has been changed.
o NOTE: The User Manual contains instructions for
assigning the IP Address from a DHCP Server and
allowing the switch to be a DHCP Server.
o This step should be accomplished by the Network
Administrator.
o Log onto the switch from a Network PC.
o Expand the “System Tree” and select user
authentication..
o Enter the new User Name and Password. Record this
information in the space provided below. File this
document for future reference.
o Click the Apply button.
USER NAME: ______________________________________
PASSWORD:_______________________________________
MAC ADDRESS: ____________________________________
IP ADDRESS: _______________________________________
Basic Configuration is complete. A
comprehensive Manual is contained on the CD
ROM. Refer to this manual to configure the
advanced features of this switch.