User Manual EIR-EXTEND Series EIRP-EXTEND PoE Series Hardened Ethernet Extender
EIR-EXTEND and EIRP-EXTEND Series Documentation Number: EIR-EIRP-EXTENDseries-4612m International Headquarters: 707 Dayton Road Ottawa, IL 61350 USA Phone (815) 433-5100 Website: www.bb-elec.com Sales e-mail: orders@bb-elec.com Technical Support: support@bb.elec.com European Headquarters B&B Electronics Westlink Commercial Park Oranmore, Co. Galway, Ireland Phone +353 91-792444 Website: www.bb-europe.com Sales e-mail: sales@bb-europe.com Technical Support: support@bb-europe.
Table of Contents PREFACE ............................................................................................................................... 1 INTRODUCTION ..................................................................................................................... 1 Product Overview ................................................................................................................................................................... 1 Product Features .......................
Preface This manual describes how to install and use the Hardened Ethernet Extender. The Hardened Ethernet Extender introduced here provides one channel for Ethernet over existing voice grade copper wire. The Hardened Ethernet Extender fully complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX/FX standards.
Packing List When you unpack this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to our authorized reseller. The Hardened Ethernet Extender CD with user’s Manual Quick Start Guide AC to DC Power Adaptor and Power Cable (optional) One-Channel Hardened Ethernet Extender Ports The Hardened Ethernet Extender provides TX ports and one Ethernet Extender port.
10/100Base-TX and Ethernet Extender Connectors 10/100Base-TX Connection The following lists the pinouts of 10/100Base-TX RJ-45 port.
Wiring Diagram Field Wiring Terminal Markings: Use Copper Conductors Only, 60/75℃, wire range 12-24 AWG, torque value 7 lb-in. DIN Rail Mounting Fix the DIN rail attachment plate to the back panel of the Hardened Ethernet Extender. Installation: Place the Hardened Ethernet Extender on the DIN rail from above using the slot. Push the front of the Hardened Ethernet Extender toward the mounting surface until it audibly snaps into place.
Connecting to Power Redundant DC Terminal Block Power Inputs or 48VDC DC Jack: Redundant DC Terminal Block Power Inputs There are two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the Hardened Ethernet Extender. Step 1: Connect the DC power cord to the plug-able terminal block on the Hardened Ethernet Extender, and then plug it into a standard DC outlet.
Specifications Applicable Standards IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, Ethernet over VDSL, IEEE802.
