User manual

Console Management

5.3 Login in the Console Interface

When the connection between Switch and PC is ready, turn on the PC and run a terminal

emulation program or Hyper Terminal and configure the communication parameters to

match the following default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

The settings of communication parameters

After finishing the parameter setup, click ‗OK‘. When the blank screen shows up, press the

Enter key to have the login prompt appear. Enter ‗root‘ (default value) for both the User

name and Password, then press the enter key to view the Main Menu

Console login interface

29 Manual Documentation Number EIRP610-2SFP-T – 0912m