Manual

AMU864, NEMA Type 4X, Fiberglass Reinforced Polyester Enclosure

•

Compression molded fiberglass reinforced polyester construction with flush, solid/opaque cover

• Allied Moulded Ultraguard

fiberglass reinforced polyester material formulation

- UV stabilized for outdoor use

• Light gray color (RAL 7035)

• Clear, polycarbonate instrumentation cover

• 304 stainless steel captive cover screws, lockable latches, and hinge pin

• Partially molded hinge and molded latch keeper

• Gasket made of closed cell neoprene cord encased in a continuous tongue and groove channel

• Polycarbonate flanges (installed) and mounting feet (bagged) with four 304 stainless steel screws

• 10-32 threaded brass inserts are installed for back panel mounting

CONSTRUCTION

APPLICATION

STANDARDS

•

Construction meets NEMA/EEMAC Type 4, 4X, 12 Specifications

•UL

® 508 and UL® 50 listed, Type 1, 2, 3, 3R, 4, 4X, 12, 13

• CSA certified file LR 89590-1

• Enclosure flammability rating per UL

® 508

• Joint Industrial Council (JIC) enclosure sizing

• Compliant with RoHS directive

8” x 6” x 4”

• Designed to insulate and protect controls and components in both indoor and outdoor applications

often found in oil refineries, waste water treatment equipment, and chemical plants

• Especially well suited for high temperature or corrosive environments

• Protects from dirt, dust, oil, and water

• For use with industrial control equipment in ordinary locations

• Clear/polycarbonate, instrumentation cover used in applications where critical electronic equipment

must be visible and protected from the elements

Screw Cover Hinged Screw Cover Hinged Snap Latch Hinged Twist Latch

Solid/Opaque AMU864F AMU864HF AMU864LF AMU864TF

Clear Cover AMU864CCF AMU864CCHF AMU864CCLF AMU864CCTF

View Window AMU864WF AMU864HWF AMU864LWF AMU864TWF

Screw Cover Hinged Screw Cover Hinged Snap Latch Hinged Twist Latch

Solid/Opaque AMU864 AMU864H AMU864L AMU864T

Clear Cover AMU864CC AMU864CCH AMU864CCL AMU864CCT

View Window AMU864W AMU864HW AMU864LW AMU864TW

• Flange mount enclosures (flanges installed)

• Foot mount enclosures (four feet bagged and shipped inside enclosure)

Ordering Part Numbers

PAGE 1
AMU864, NEMA Type 4X, Fiberglass Reinforced Polyester Enclosure 8” x 6” x 4” A P P L I C A T I O N • Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants • Especially well suited for high temperature or corrosive environments • Protects from dirt, dust, oil, and water • For use with industrial control equipment in ordinary locations • Clear/polycarbonate, instrumentation cover us
PAGE 2
AMU864, NEMA Type 4X, Fiberglass Reinforced Polyester Enclosure B Z 0.562 W H C SA Flange Mount U L F Foot Mount Latch Location On Vertical C/L M D Nominal Wall Thickness - 0.125 in (3 mm) E N Usable Depth Enclosure Size Cover Panel Boss Flange Mount Flange Mount A B C F W U S Z H L AMU864F 8.05 6.27 4.13 4.11 6.72 8.50 6.25 4.25 4.00 8.88 8.