Datasheet

Copyright © 2011 IMC Networks. All rights
reserved. The information in this document is
subject to change without notice. IMC Networks
assumes no responsibility for any errors that may
appear in this document. Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.
IMC Networks
Fiber Consulting Services
For information call:
TEL: [phone]
1-800-624-1070 (US/CAN)
[phone] (Europe)
[e-mail]
IMC Networks
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: [phone]
FAX: [phone]
IMC Networks
Europe
Herseltsesteenweg 268
B-3200 Aarschot, Belgium
TEL: [phone]
FAX: [phone]
[e-mail]
IMC Networks
Eastern US/Latin America
28050 U.S. Hwy. 19 North, Suite 306
Clearwater, FL 33761
TEL: [phone]
FAX: [phone]
[e-mail]
DS-iMcV-E1-Mux4-1112EX
• 2 x MSA compliant optical SFP slots
• 4 x E1 (RJ-48) copper ports
• Local RS-232 Console port
• RS-232 transparent to 120 Kbps
• IEEE 802.3x Flow Control
• IEEE 802.3i 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
• ITU G.775
• GR-820-CORE
• Supports over-sized packets up to
1916 bytes per packet
• Configureable as Host/ Remote pairs
(DIP Switch selection)
• SNMP management via GUI-based
iView
2
application software
• 10/100BaseT Full Bandwidth
(144,800 fps/FDX)
• RoHS compliant
• Last Gasp Trap
Fiber Optics Specifications
The unit supports any MSA compliant SFP with a 155 Mbps bandwidth rating. DDMI capabilities are supported through the iView
2
management
software when the unit is installed in a managed chassis. IMC Networks provides a complete range of SFP units in both Single and Dual fiber
versions with a full range of wavelengths and distance ratings. For complete power budgets and information on calculating specific distances, visit
www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000 for a free consultation.
Ordering Information
Technical Specifications
PART NUMBER DESCRIPTION DISTANCE
IE-iMcV-E1-Mux/4
857-18111 IE-iMcV-E1-Mux/4+Ethernet, 2 x SFP (requires one or two SFP/155 Modules)
§
2 km to 80 km
IE-iMcV-E1-Mux/4 Accessories
825-39951 Serial Cable, MiniJack to DB9 (female)
Application Example
In a typical application, a Customer PABX is provided with up to four E1 lines from the Public Switch Telephone Network (PSTN) over a protected
optical link. In addition, the customer location can receive a full bandwidth, 100BaseT Ethernet connection to the Internet from the local Internet
Service Provider (ISP) over the same, protected, optical link. Operation Administration and Management (OAM) functions for the link are provided
from the Host location through either a “Console” RS-232 connection on the Host unit or a SNMP connection through the management interface at
the Host chassis. In this example, the RS-232 “Console” port of the remote PABX is also carried back to the Host location for remote management of
the customer located PABX, using the end-to-end serial RS-232 port on the iMcV-E1-Mux/4.
Connectors:
• Four E1 (RJ-48) copper ports
• Two SFP slots
• One RS-232 on MiniJack
• One 10/100BaseT on RJ-45
• One RS-232 on RJ-45
Regulatory Approvals:
• IEEE-802.3u
• ITU G.775 (AIS, LOS)
• GR-820-CORE
Dimensions:
Double-wide chassis module
Shipping Weight:
1.1 lbs. (0.50 kg)
Operating Temp:
-40°F to 158°F (-40°C to +70°C)
5% to 95% (non-condensing),
0 – 10,000 ft. altitude
Storage Temp:
-40°F to 158°F (-40°C to +70°C)
5 to 95% (non-condensing)
Power Consumption (Typical):
0.96A @ +5 VDC
§
SFP modules are sold separately. For more information on IMC Networks’ SFPs, go to: www.imcnetworks.com/Products/product.cfm?family=32