Specifications

7
DIN Rail Clips
The MiniMc can be mounted with
two DIN Rail clips, a hardware
option available through B&B
Electronics. The DIN Rail clips
include screws, to allow the
installation onto a DIN Rail. Install
the screws into DIN Rail clips,
which should be mounted
perpendicular to the DIN Rail.
Snap the converter onto the clips.
To remove the converter from the
DIN Rail, use a flat-head
screwdriver into the slot to gently
pry the converter from the rail.
NOTE
The DIN clips are designed for use on a DIN-35 rail.