Manual

www . bb - elec . com |
Protocol-Independent Wavelength Division
Multiplexing for High Volume Optical
Networking Applications
IE-iMcV-WDM/2 Series
Wavelength Division Multiplexing (WDM) is a technology that enables
the transmitting of multiple, optical signals on different wavelengths
over one strand of fiber. Suited for installations where fiber is limited
in terms of availability, service providers and enterprise network
managers can easily double their fiber capacity without incurring
the costs associated with installing new fiber. Campus area network
managers can deploy the WDM/2 solution, for example, to combine
voice and data traffic over the same duplex fiber between company
facilities.
WDM/2andiMcV-WDM/2aretwo-channel,passive,protocoland
speed-independent Wavelength Division Multiplexers which allow two
individual wavelengths to share one fiber pair; Full-Duplex data travels
on 1310 nm and 1550 nm to virtually double the capacity of installed
fiber. Deploy WDM/2 products in pairs so that the host site will
multiplex 1310 nm and 1550 nm onto the fiber and the remote site will
then separate the signals by the wavelength. Available in standalone
and modular versions, the protocol-independent WDM/2 products
enable the transmitting of any protocol and any speed over 1310 nm or
1550 nm single-mode fiber.
Support a variety of protocols; easy installation
As passive, protocol-independent Wavelength Division Multiplexers,
WDM/2andiMcV-WDM/2complywithawiderangeofcommunications
protocols including Ethernet (10/100/ 1000 Mbps), SONET/SDH (OC-3,
OC-12 OC-48), FDDI, ATM, ESCON, T1/E1, E3, DS3, FibreChannel,
and 10G. Installing WDM/2 products is easy— standalone WDM/2
chassiscomereadytoinstallandiMcV-WDM/2modulesslideintoany
iMediaChassis or MediaChassis/2. There is no configuration required
for either version.
PRODUCT FEATURES
ORDERING INFORMATION
MODEL NUMBER FIBER FIBER PORTS
iMcV-WDM/2
849-14100 SC 4
WDM/2 Stand Alone Chassis
849-10100 SC 4
• WDM/2andiMcV-WDM/2doublethecapacityofinstalledberby
transmitting two wavelengths on one strand of fiber
• WDM/2andiMcV-WDM/2arespeedandprotocol-independent,and
support 1310 nm and 1550 nm single-mode fiber
• WDM/2chassisperformsmultiplexingwithNOoutsidepowerrequirement
• Modular,hot-swappablearchitecturereducesoperationalcosts
associated with product installation, upgrades and maintenance
iView: Windows 2000/XP/Vista/Win7
IE-iMcV-WDM/2Series_3713ds