User Manual

® 2009 N-TRON , Corp. N-TRON and the N-TRON logo are trademarks of N-TRON , Corp. Product names mentioned herein are for identifi cation purposes only and
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application
of
N-TRON products rests with the end user. N-TRON makes no warranties as to the fi tness or suitability of any N-TRON product for any specifi c application. N-TRON Corporation
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
Printed in USA.
REV 090805
7018TX Specifi cations
Switch Properties
Number of MAC Addresses: 8,000
Aging Time: Programmable
Latency Typical: 2.6 s
Switching Method: Store-and-Forward
Case Dimensions
Height: 2.3" (5.8 cm)
Width: 8.3" (21.0 cm)
Depth: 4.8" (12.1 cm)
Weight (max): 3.3 lbs (1.5 kg)
DIN-Rail Mount: 35mm
Electrical
Redundant Input Voltage: 10-30 VDC (Regulated)
Input Current (max): 520mA max. @ 24VDC
N-TRON Power Supply: NTPS-24-1.3 (1.3A@24V)
Environmental
Operating Temperature: -40
o
C to 70
o
C
Storage Temperature: -40
o
C to 85
o
C
Operating Humidity: 5% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounted)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF: >2 Million Hours
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
1000BaseT: >Cat5e Cable
1000BaseSX Multimode: 50-62.5/125m
1000BaseLX Singlemode: 7-10/125m
THE INDUSTRIAL NETWORK COMPANY
7018TX Industrial Ethernet Switch Ordering Information
7018TX Sixteen 10/100BaseTX Ports, Two Optional Gigabit SFP Ports
NTSFP-TX Optional SFP (Mini-GBIC) Transceiver with One 1000BaseT GB Copper Port
NTSFP-SX Optional SFP (Mini-GBIC) Transceiver with One 1000BaseSX Multimode GB Fiber Optic Port
NTSFP-LX-ZZ Optional SFP (Mini-GBIC) Transceiver with One 1000BaseLX Singlemode GB Fiber Optic Port
NTPS-24-1.3 N-TRON Power Supply - (1.3 Amp @ 24VDC)
700-PM Panel Mount kit
URMK Universal Rack Mount Kit
Where: ZZ = 10, 40, or 70 for GB Singlemode
If SFP Transceiver is not specifi ed at the time of purchase, slots will remain blank with covers
SFP Gigabit Fiber Transceiver Characteristics
* SX Fiber Optic Cable
** LX Fiber Optic Cable
Fiber Length 550m for 50/125μm 10km** 40km** 70km**
TX Power Min -9.5dBm/-4dBm -9.5dBm/-3.5dBm -2dBm/3dBm 0dBm/5dBm
RX Sensitivity Max -17dBm -20dBm -22dBm
-23dBm
Wavelength 850nm 1310nm 1310nm 1550nm
Assumed Fiber Loss .45dB/km .35dB/km .25dB/km
Laser Type VCSEL FP DFB DFB
Connectors
10/100BaseTX: Sixteen (16) RJ-45 Copper Ports
Optional SFP Ports:
1000BaseT: Up to Two (2) RJ-45 Gigabit
Copper Ports (optional)
1000BaseSX: Up to Two (2) LC Duplex Gigabit
Fiber Ports (optional)
Recommended Wiring Clearance
Front: 4" (10.16 cm)
Side: 1" (2.54 cm)
Regulatory Approvals: 7018TX
FCC Title 47, Part 15, Subpart B - Class A; ICES-003 - Class A
UL Listed (US and Canada) 1604; ANSI/ISA-12.12.01-2007
Class I, Div 2, Groups A, B, C, D, and T4A
CE: EN61000-6-2:2001: EN61000-4-2, 3, 4, 5, 6
EN55011:1998+A1:1999+A2:2002-Class A
EN50155 for Railway Applications
GOST-R Certifi ed, RoHS Compliant
Designed to comply with:
IEEE 1613 for Electric Utility Substations
NEMA TS1/ TS2 for Traffi c control
Contact Information
N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL 36609 USA 6330 Cham / Zg Switzerland
TEL: [phone] TEL: [phone]
FAX: [phone] FAX: [phone]
Website: www.n-tron.com
Email: [e-mail]