User guide

(Revised 2010-2-24) Page 28 of 153
Administration – System, Continued…
By selecting the Modify button, you will be able to change the switch’s IP Address, Subnet Mask, Gateway,
Name, Contact information, the Location of the switch, and the upper and lower temperature thresholds
through the web management features. It is recommended to change the TCP/IP information through the
Command Line Interface (CLI) initially, but it defaults to the following:
IP Address – 192.168.1.201
Subnet Mask – 255.255.255.0
Gateway – 192.168.1.1