User guide

508TX Industrial Ethernet Switch Ordering Information
508TX Eight 10/100BaseTX Ports
508TX-N 508TX with N-View
508TX-A 508TX with N-View and Advanced Management Features
THE INDUSTRIAL NETWORK COMPANY
508TX-A Specifi cations
Switch Properties
Number of MAC Addresses: 4,000
Aging Time: 20s, Programmable (-A)
Latency Type.: 2.1 μs
Backplane Speed: 2.6Gb/s
Switching Method: Store & Forward
Case Dimensions
Height: 2.3" (5.8cm)
Width: 5.9" (15cm)
Depth: 3.5" (8.8cm)
Weight: 1.6 lbs (0.8kg)
Din-Rail: 35mm
Electrical
Redundant Input Voltage: 10-30 VDC
Input Current: 200 mA@24V
Inrush: 9.0Amp/0.6ms@24V
Environmental
Operating Temperature: -20
o
C to 70
o
C (Standard)
-40
o
C to 85
o
C (Extended)
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounting)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF: >2Million Hours
Serial Confi guration Port
Com Parameters: 9600,n,8,1
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
Connectors
10/100BaseTX: Eight (8) RJ-45 Copper Ports
Recommended Wiring Clearance
Front: 4" (10.16 cm)
Side: 1" (2.54 cm)
Regulatory Approvals
FCC/CE (CFR 47, Part 15, Subpart B, Class A)
EMC Dir 89/336/EEC, EN 50204, EN 55011
EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4
ANSI C63.4, ICES-003
UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A
UL 508 and UL 1604
CAN/CSA-C22.2 No.213, ATEX II 3 G Ex nA
ABS Type Approval for Shipboard Applications
GOST-R Certifi ed, RoHS Compliant
Designed to comply with:
IEEE 1613 for Electric Utility Substations
NEMA TS1/TS2 for Traffi c Control
REV 090804
Contact Information
N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL36609USA 6330 Cham / Zg Switzerland
TEL: [phone] TEL: [phone]
FAX: [phone] FAX: [phone]
Website: www.n-tron.com
Email: [e-mail]
® 2009 N-TRON , Corp. , N-TRON and the N-TRON logo are trademarks of N-TRON , Corp. Product names mentioned herein are for identifi cation purposes only and
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application
of
N-TRON products rests with the end user. N-TRON makes no warranties as to the fi tness or suitability of any N-TRON product for any specifi c application. N-TRON Corporation
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
Printed in USA.