Manual

International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]
www.bb-elec.com
[e-mail]
[e-mail]
RS-422/485 Isolated Repeater
485OPDR
The 485OPDR is an optically isolated RS-422/485 isolated line repeater that
can be used to isolate a piece of equipment from the rest of the network. As
a repeater, it extends the distance of an existing network an additional 1.2
km (4000 ft.) and expands it beyond the typical 32-node limitation. Data
signals and the power inputs connect to the terminal block. 600W surge
suppression ensures that the connected equipment is protected even in the
harshest of environments. 2-wire RS-485, 4-wire RS-485 and RS-422 are
supported.
The repeater operates on externally sourced 10 to 30 VDC power. The
enclosure has a DIN rail mount that is designed to fit easily on a standard
35mm rail.
• Extenddataupto1.2km(4000ft.)
• 2000Vopticallyisolateddatalines
• -40to80°Coperatingtemperature
• ModbusASCII/RTU
PRODUCT FEATURES
ACCESSORIES
MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power
MDR-40-24 - DIN rail mount power supply 24VDC, 1.7 A output power
DRPM25 - 35mm DIN Rail to Panel Mount Bracket, 25mm wide
EK-CLIP-MPC - DIN rail clip for enclosure
ORDERING INFORMATION
Model nuMber desCriPtion
485OPDR RS-422/485 Isolated Repeater
SPECIFICATIONS
rs-422/485
Connector Terminal Block
Signals
TDA(-), TDB(+), RDA(-),
RDB(+), GND
RS-422 4-wire, RS-485 2- and 4-wire
Protected GND on Isolated Side
isolation
Method Optical
Rating 2000 V
surge suPPression
Method TVS
Rating
6.5V bi-directional
avalanche breakdown device
500W peak power dissipation
Response Time < 1 pico-second
industrial bus
Modbus ASCII/RTU
Power
Connector Terminal block
Voltage 10 to 30 VDC
Power Consumption 0.7 W
Source External source required
terMinal bloCks
Wire Size 24 to 14 AWG
Torque 4 kgf-cm
led indiCators
2 DATA LEDs (RED)
Data LED for each side of isolator
Flashes when data transmitted
enClosure
Material Plastic
IP Rating 20
Dimensions 2.5 x 7.9 x 9.5 cm (1.0 x 3.1 x 3.7 in)
Mounting 35 mm DIN (Panel Mount Adapter is available)
environMental
Operating Temperature -40 to 80 C (-40 to 176 F)
Storage Temperature -40 to 85 C (-40 to 185 F)
Operating Humidity 0 to 95% Non-condensing
MTBF 225299 hours
MTBF Calculation Method MIL217F Parts Count Reliability
Agency Approvals
CE, FCC
cULus Recognized, File E222870
9.5 cm
3.7 in
7.9 cm
3.1 in
2.5 cm
1.0 in
485OPDR_3713ds