Specifications

6 485DSS-0812 Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone]
Figure 3. RS-485 Wiring Diagram
4-Wire Mode
To configure the 485DSS for RS-485 or 422 four-wire mode,
place the jumper in the 4W position. Refer to Figure 4 for connecting
information and Figure 2 for the jumper location. In this position on a
4-wire network the Host and the RS-232 device can communicate in
full duplex. CAUTION: Data loss may occur if the Host sends
485DSS commands while the host is receiving data from the
network!