User Manual

Documentation No.3PXCC1x-2x-3903 27
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone]
Click on the highest Basic configuration number in the list on the
“Setting based on” category.
Double-click on the Input/Output Range to set the Address.
Double-click on the Interrupt Request to set the IRQ.
Select IRQ and Address that you want your port(s) configured at.
28 Documentation No.3PXCC1x-2x-3903
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone]
At this point you can shut down the system and physically install
your B&B Electronics Serial Card into an available ISA slot. Double
check to make sure the addresses and IRQ’s on the Serial Card are
set to the correct settings.