Specifications

232XSSD43800 Manual 7
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH [phone] -- FAX [phone]
Important:
All jumpers must be in the same position, either DCE or
DTE positions. Do not mix positions! Refer to Figure 3 which shows
the Master port configured as a DCE port.
CAUTION:
Always power down the Smart Switch before removing
its cover.
Table 2. DCE MASTER PORT CHART
Pin # Signal Description
Signal
Direction of
DCE Master
Port
2
TD Transmit Data Input
3
RD Receive Data Output
4
RTS Request to Send Input
5
CTS Clear to Send Output
6*
DSR Data Set Ready Output
7
SG Signal Ground <------>
8*
CD Carrier Detect Output
20
DTR Data Term Ready Input
14**
TD (B) Transmit + Output
15**
TD (A) Transmit - Output
16**
RD (B) Receive + Input
17**
RD (A) Receive - Input
* Pins 6 & 8 are tied together inside the 232XSSD4 and
share the same output. Refer to Figure 5.
** 422 master port option.