Installation manual

Rev. B 13 KEMU000826
03/26/04
4.1 SETTING UP RAPID EYE SOFTWARE, CONTINUED
13. Once the rules are configured, select Apply then Yes in response to the
Maintenance Message. Wait for the System Operational message to appear
in the Feedback dialogue box. (Same procedure as described in steps 8 - 9).
14. From VIEW, initiate a Live session to the Remote Unit and verify that installation
and setup are correct and that a separate data window is available for the POS
device. Initiate a Live session to the Remote Unit. A data stream will appear and
can be selected in the same manner as any other available video stream. All
streams will be selected by default; this will be the same for Live or Retrieval
sessions. Verify that the POS device is communicating with the Rapid Eye
system by initiating a transaction at the POS device and verifying that the correct
data appears in the Data Input window.