Technical data

Installation ◆ Air Supply Connections

18 310633C

6. For air spray, HVLP, and air-assist airless gun appli-

cations:

• Systems without a Gun Flush Box, connect

the gun air supply line between the Smart Fluid

Panel gun air outlet

(N - FIG. 9) and the

spray gun air inlet (AA - F

IG. 10).

• Systems with a Gun Flush Box, connect the

gun air supply line between the Smart Fluid

Panel gun air outlet

(N - FIG. 9) and the

atomizing air safety shutoff valve. See Gun

Flush Box Manual 310695.

CAUTION

The ProMix™ II potlife timer will not function properly

when used with multiple guns operating simultane-

ously. To avoid having mixed material set in the equip-

ment, carefully monitor potlife by some other means.

Install a bleed-type air shutoff valve (Z) in the gun

air supply line or at the gun air inlet (AA). F

IG. 10,

IG. 11.

WARNING

If using a Graco electrostatic PRO

™

Gun, a shutoff

valve must be installed in the gun air line. Contact your

Graco distributor for information on air shutoff valves

for electrostatic applications.

FIG. 9

FIG. 10

IG. 11