Technical data

Installation ◆ Typical Installation
12 310633C
Installation
Typical Installation
Key - FIG. 3
A Color Change Valve Lines (Component A)
B Component B Line
C EasyKey™ Display
D Display
E Keypad
F Main Air Line
G Air Regulator
H Air Shutoff Valve
JOperator Station
K Operator Station Cable
L Power Cable
M Fiber Optic Cable
N Smart Fluid Panel
PSpray Gun
Q Gun Air Line
R Gun Fluid Line
S Solvent Line
T Fluid Shutoff Valve
• Reference numbers and letters in parentheses in the text refer to numbers and letters in the illustrations.
• Icons in the text refer to icons on the equipment or keypad.
•F
IG. 4 and FIG. 5, page 14, show typical installations. Contact your Graco distributor for actual system
designs.
• Be sure all accessories are adequately sized and pressure-rated to meet system requirements.
• For maintenance and safety, you must have a shutoff valve between each fluid supply line and the ProMix™
II system.
• A 100 mesh minimum fluid filter must be installed on component A and B fluid supply lines.
• See page 16 for dimensions.
• To protect the Operator Station and EasyKey™ Display screens from paints and solvents, clear-plastic pro-
tective shields are available in packs of 10. See the ProMix™ II Service and Parts manual to order. Clean
the screens with a dry cloth if necessary.