User Manual

The N-TRON
®
105TX-POE Unmanaged Industrial Ethernet
Switch is designed to trasmit power, along with data, over
an Ethernet network and is ideal for PoE capable devices
where running an AC power feed is either not possible or
cost effective. This feature allows an end user to power a
PoE camera, wireless access point, or any other PoE capable
device without the need for running separate wires for power .
This also allows the ability for a centralized battery backup
for all these devices.
PRODUCT FEATURES
• Compact, Space Saving Package
• Full IEEE 802.3 and 802.3af Compliance
• American Bureau of Shipping (ABS) Type Approval
• EN50155 for Railway applications
• Five 10/100BaseTX RJ-45 Ports (4 PoE Ports)
• Unmanaged Operation
• Extended Environmental Specifi cations
• -40ºC to 85º Operating Temperature
• Automatic Detection of Connected PoE Devices
• Support for Full/Half Duplex Operation
• Auto-sensing Duplex, Speed, and MDIX
• Up to 1.0 Gb/s Maximum Throughput
• Full Wire Speed Communications
• Supports 15.4 Watts per port
(13 Watts at the PD)
• Redundant Power Inputs (46-49 VDC)
• Power Fault Status LED's
• LED Link/Activity Status Indication
• LED PoE Status Indication
• Hardened Metal DIN-Rail Enclosure
PRODUCT OVERVIEW
The 105TX-POE Industrial Network Switch is designed
to meet the most demanding industrial communications
requirements by providing high throughput and minimum
downtime while also providing power to PoE capable devices
over the Ethernet network.
The
105TX-POE provides five RJ-45 auto sensing
10/100BaseTX ports. All ports are full/half duplex capable,
using "state of the art" Ethernet switching technology. Four
of the fi ve RJ-45 ports also act as PoE ports allowing power
to pass through four of the eight strands of CAT5 cable. Each
PoE port supports up to 15.4 watts of power.
The
105TX-POE auto-negotiates the speed and fl ow control
capabilities of the fi ve TX port connections, and confi gures
itself automatically.
The N-TRON 105TX-POE also supports up to 2,000 MAC
addresses, enabling these products to support extremely
sophisticated and complex network architectures.
The
105FX-POE automatically detects any PoE device
that is connected and powers it accordingly. If a PoE fault is
detected on a specific port the Auto-disconnect feature
disables PoE power on that port, allowing only data
communications to pass. This reduces reducing the risk of
damaging costly equipment.
The
105TX-POE is an ideal candidate for providing data
and power to wireless LAN access points, network cameras,
VoIP, and other PoE capable devices. The product also helps
reduce costs by eliminating the need for electrical wiring and
electrician expenses.
The
105TX-POE has extended operating environmental
specifications to meet the harsh needs of the industrial
environment. For cost savings and convenience it can be
DIN-Rail mounted alongside Ethernet I/O or other Industrial
Equipment.
To increase reliability the 105TX-POE provides dual
redundant power inputs. Two power LED's are also provided
on this unit indicating a valid power source on both the
redundant power inputs and also indicating when a power
fault bus occurs.
THE INDUSTRIAL NETWORK COMPANY