Manual

The REX Unit
TheRemoteExtender(REX)unitprovidesUSBTypeAportsforUSB3.0devices.TheREXunitallowsyou
toconnectuptotwoUSB3.0devicesdirectly.TheREXunitispoweredbyanexternalACadapterandcan
supply up to 900mA to each USB port.
Front View
Front View
RearView
RearView
ITEM TYPE DESCRIPTION
1 USB 3.0 Type A ports UsedtoconnectUSB3.0device(s)totheREXunit.Portsaccept
locking or non-locking USB 3.0 Type A connectors.
2
Power ON Unit is powered properly.
Power OFF Unit is not powered or not powered properly.
3
Status Blinking (1Hz) WaitingforconnectiontoLEX.
Status ON LEX/REXarelinkedandoperatingnormally.
Status OFF Fault detected; power cycle required.
4
Host ON SuperSpeed Host detected on upstream facing port.
Host OFF SuperSpeed Host not detected.
5 Power Port ConnectstothelockingACpowersupply.RequiredonREXfor
proper operation.
6 Config Port Reservedformanufactureruse.
7 LinkPort(DuplexLC) ExtensionlinkDuplexLCberoptictransceiverport.
5