Use and Care Manual

THANK YOU FOR PURCHASING A B-AIR PRODUCT.
Before Grooming
Be careful not to blow air into the animal's face, ears or nose. Use the cone nozzle to
blow out dirt from the undercoat and separate matted hair
After Bathing
Towel-dry the animal to remove excess water. Use the cone nozzle to blow off
moisture working out from the skin. Switch to one of the other attachments to dry
more sensitive areas.
Operation I Use
• Plug the flexible hose to the front cap connector
• Plug in the power cord and switch power on
• Adjust the variable wind speed switch knob and select the desired setting
according to your needs
• Turn the variable wind speed switch knob back to minimum and turn off the
power switch after usage
• Unplug the dryer from the power source and unplug the hose and nozzle when
you are finished using the dryer
Power Requirements
Cords
Use a single outlet that is at least 20 amps and has a ground wire. Use the unit with
a correct outlet and do not share the same outlet with other appliances.
Use 3 pronged adapters that are UL and CE approved with Ground Fault Circuit
Interrupter (G.F.C.I ). Do not use power cords that show any sign of wear or damage .
Cords are not covered by warranty.