User Manual

OPERATING INSTRUCTIONS
Please ensure that your rotary head is adjusted to maintain a minimum of
1” clearance between the spray tips and the surface being cleaned.
While operating your surface cleaning system, please ensure that the
nylon brush skirt remains in contact with the surface being cleaned. Do
not operate on vertical or overhead surfaces. We strongly recommend
that safety eye goggles, gloves and work boots be worn when operating
this Whirl-a-Way. Keep hands and feet away from the high pressure,
high speed rotating arm that is protected by the plastic cover.
Should your surface cleaner not be used for long periods of time, it is
recommended that you remove the hose from the top of the rotary head
and a vegetable oil be used to lubricate the swivel head’s internal parts.
Manually turn the rotary arm to allow lubrication of all internal parts before
storing.
You will quickly find your surface cleaning system a welcome addition to
your pressure washing applications. It is designed to give you a safe
and rapid method for cleaning hard surfaces, and will save you time in
comparison to using a conventional gun and wand. The durability of
this surface cleaning system is enhanced by the way it is handled by
the operator. Please take care to ensure that the Whirl-A-Way is not
continuously being swung against buildings, curbs, or other objects as
this can damage the cover. Also, be aware that the high speed rotating
arm must not come in contact with rigid protruding objects which can
quickly damage or completely break off the steel arm. Finally, do not apply
excessive weight to the plastic cover.
5