WHIRL-A-WAY 85.403.003 85.403.005 85.403.007 85.403.009 85.403.010 85.403.
INTRODUCTION Attention: Read through the complete manual prior to the initial use of your Whirl-A-Way Using the Operator’s manual The operating manual is an important part of your Whirl-A-Way. It should be read thoroughly before initial use and referred to often to make sure adequate safety and service concerns are being addressed. Reading the owner’s manual thoroughly will help avoid personal injury or damage to your pump.
PRODUCT IDENTIFICATION Record Identification Numbers Whirl-A-Way If you need to contact an Authorized Dealer or Customer Service line (61-2-4577-2144) for information on servicing, always provide the product model and identification numbers. You will need to locate the model and serial number for the pump and record the information in the places provided below.
OPERATING INSTRUCTIONS Set-Up 1. Fit the lower portion of the handle into the mounting brackets on the cover and secure with the bolts or the pins & clips. 2. Next, tighten the “fixed” hose end into the gun mounted onto the upper portion of the handle. Use teflon tape on the hose ends. 3. Once this is complete, join the two sections of the handle together and secure with the bolt or the pin & clip. Tighten the swivel end of the hose into the top of the rotary head. 4.
OPERATING INSTRUCTIONS Please ensure that your rotary head is adjusted to maintain a minimum of 1” clearance between the spray tips and the surface being cleaned. While operating your surface cleaning system, please ensure that the nylon brush skirt remains in contact with the surface being cleaned. Do not operate on vertical or overhead surfaces. We strongly recommend that safety eye goggles, gloves and work boots be worn when operating this Whirl-a-Way.
PARTS DIAGRAM 85. 403. 003 85. 403. 007 85. 403. 011 6. 8. 5. 13. 4. 7. 14. 1. 2. 3. 10. 12. 11. 6 9.
PARTS LIST 85. 403. 003 NO# 1 2 3 4 5 6 7 8 9 10 11 12 13 PART # 85.792.003 85.790.004 85.792.004 85.238.059 AC7501 85.300.105 85.792.008K 85.602.005 85.792.010 85.792.009 85.792.011 85.225.025 85.791.020 DESCRIPTION Bracket, Mounting Head 16” Rotary Head, 16” Mounting Blocks Hose, 62” x 3/8” Easy Pull Gun Plug, 3/8” MNPT Handle Hand Grip Brush, 16” Cover, Polypropylene 16” Rotary Arm, 16” Nozzle, 25 Deg. 025 Sleeve For DC5090 WAW Gun 85. 403. 007 NO# 1 2 3 4 5 6 7 8 9 10 11 12 13 PART # 85.792.003 85.
PARTS DIAGRAM 85. 403. 005 6. 8. 5. 4. 7. 1. 2. 3. 10 . 13. 12. 8 11. 9.
PARTS LIST 85. 403. 005 NO# 1 2 3 4 5 6 7 8 9 10 11 12 13 PART # 85.791.001 85.790.006 85.419.116 85.238.057 85.202.115 85.300.105 85.419.040K 85.602.005 85.790.029 85.419.046 85.419.019 85.791.007 85.225.025 DESCRIPTION Bracket, Mounting Head 18" Rotary Head, 18" Mounting Blocks Hose, 62" x 3/8" Spray Gun Plug, 3/8" MNPT Handle Hand Grip Castor Wheel Castor Bracket Cover, Polypropylene 18" Rotary Arm, 18" Nozzle, 25 Deg.
PARTS DIAGRAM 85. 403. 009 85. 403. 010 6. 8. 5. 4. 7. 1. 2. 3. 11 . 13. 10 . 12. 9.
PARTS LIST 85. 403. 009/ 85. 403. 015 NO# 1 2 3 4 5 6 7 8 9 10 11 12 12 13 PART # 85.791.002 85.790.004 85.792.019 85.238.059 AC7501 85.300.105S 85.792.018K 85.602.005 85.792.013 85.790.029 85.792.012 85.792.017 85.791.010S 85.225.020 DESCRIPTION Bracket, Mounting Head 20" Rotary Head, 20" Mounting Blocks Hose, 62" x 3/8" Spray Gun Plug, 3/8" MNPT Handle Hand Grip Brush Skirt, 20" Castor Wheel Cover, Stainless Steel 20" Rotary Arm, 20” SS WAW, 2 Arm Rotary Arm, 20” SS WAW, 3 Arm Nozzle, 25 Deg. 020 85.
ROTARY HEAD REPAIR Nozzle Requirement PUMP OUTPUT 3 GPM 4 GPM 5 GPM 6 GPM NOZZLE REQUIREMENT 85.225.020 (2 GPM/25°) 85.225.025 (2.5 GPM/25°) 85.225.030 (3 GPM/25°) 85.225.035 (3.5 GPM/25°) QTY 2 2 2 2 Rotary Head Repair Parts A repair kit for this Whirl-a-Way’s rotary head, is available. If you encounter problems with the rotary head after the 1 year warranty has expired, this repair kit (part #85.790.010) allows you to replace the inner components very quickly.
WARRANTY Warranty This surface cleaning unit has a 1-Year warranty on all components except for the nylon brush ring. This includes the rotary head, spray gun, hose, the nylon brush ring, and plastic cover. This warranty covers manufacturer defects only and does not extend to any damage caused by the user. It also does not extend to any wear and tear caused by regular use of the product.
If you need assistance with the assembly or operation of your Whirl-A-Way please call 61-2-4577-2144
