User's Manual

COAT015197 – Instruction manual ONE-C – EN

Modification of a setting:

To modify a setting in the PLC, you must:

1- Using the directional arrows and the "Enter » key, select the

setting that you want to modify. The value is displayed.

2- Press "Enter" again to be able to modify the value

3- Set the desired value using the up and down arrows.

4- Press "Enter" again to confirm

5- Then press "ESC" to return to the list of parameters

6- Press "ESC" again to exit the menu

4.5 "IP CONFIG" - IP address configuration:

See §14 TCP/IP Modbus Communication

=T_manoeuvre=

Up(Next)/Down(Prev)

Enter => Edit value

=== USER PARAM ===

T_manoeuvre [*]

FAT [ ]

FAP [ ]