User's Manual

COAT015197 – Instruction manual ONE-C – EN
14
T_detection_FAP
Minimum detection time on the magnetic
loop so that closing after passage is
activated (default mode: 0.5s)
s
●
●
T_PVT
Duration of the delayed low speed in
closing (for irreversible barriers) (default
mode: 1s)
s
●
●
Presign_OUV
Time of pre-notification before
the opening of the barrier. (default mode:
0s)
s
●
●
Presign_FERM
Duration of the pre-signalling before the
barrier closes. (default mode: 0s)
s
●
●
Clignotement_feux
Activation of the flashing lights on arm
(TRUE: on; FALSE: off).
●
●
T_ON_feux
Time during which the lights on the arm
are lit. (default mode: 0.5s)
s
●
●
T_OFF_feux
Time during which the lights on the arm
are
off. (default mode: 0.5s)
s
●
●
PWM_verrou
Activation of the PWM function on the
output
lock (Q3) to consume less (TRUE: on;
FALSE: off).
●
●
T_verrouillage
Time after which the lock is
activated after the barrier is completely
closed. (default mode: 1s)
s
●
●
Activation_deverr
Option to be activated when the barrier is
equipped with a mechanical locking
device (except in the case of the
electromagnetic suction cup) so that the
barrier closes very slightly before each
opening to release the lock. (TRUE: On;
FALSE: Off).
●
●
T_deverrouillage
Duration of reclosing to release the lock
before the barrier is opened (see
parameter "Latch_activation").
(default mode: 0.2s)
s
●
●
Angle_deverr
Angle from which the locking is
deactivated if the arm is forced.
(default mode: 20°)
°
●
●
Mode_1_BP
Activation of the "1 BP" control mode
which allows the barrier to be controlled
with a single command: the opening
command then becomes a command to
closing when the barrier is open (TRUE:
enabled; FALSE: disabled).
●
●
Mode_homme_mort
Activation of the "dead man" control
mode: the closing command must be
maintained until the end of the closing
process, otherwise the barrier will
automatically re-open.
(TRUE: On; FALSE: Off).
●
●
Mode_orange
Activation of the orange lighting of the
●
●