User's Manual

3.4.2. Advanced

 Broadcast SSID: It is enabled by default, and anyone can see this device in the

wireless network. If it is disabled, any network client who wants to connect to

this device has to enter the correct SSID.

 Power Save: This function only works on no charging mode. If no any Wireless

station connect to Router and idle time is up, the Wi-Fi will be turn off. At this

time, user must press power button 1 second, and then the Wireless interface

will be wake up again.

 Maximum Idle time: In no charging mode, you can set the idle time for power

saving. If no wireless station is connected to the router and the idle time expires,

Wi-Fi will turn off.

 Maximum Users: You can select the maximum number of network clients

allowed to connect to this device.

3.4.3. Mac filter

 MAC Address List: After enabling the MAC filter function, please enter each MAC

address of the devices which is allowed to access this router.