User's Manual

15
Enable: Enable the PIN Code. You need to enter correct SIM card PIN code to
open 3G network.
 Set PIN Code: When PIN is enabled, you can change the PIN Code from current
PIN Code to New PIN Code and confirm it in HSPA+ Mobile Router.
3.4 Wi-Fi Settings
3.4.1. Basic
 WLAN:
Enabled (default): This turns on the Wi-Fi connection, and becomes a router
sharing the 3G connection.
Disabled: This turns off the Wi-Fi connection and becomes modem mode
allowing only one device to internet connection by USB.
 Network Name (SSID): This is the ID of HSPA+ Mobile Router which appears on
the wireless network. You can assign an ID up to 32 characters here.
 Channel: You can change the Wi-Fi radio channel in this drop-down menu.
 Encryption Type: We highly recommend you to select one of the encryption
types to secure your wireless connection when using this device. Please make
sure your Wi-Fi device can support the encryption mode you selected.
 WPA Pass Phrase: Enter 8 to 63 characters for the WPA encryption key. All
wireless devices must use this key to connect.