User's Manual

10
2. HSPA+ Mobile Router Connection
With HSPA+ MOBILE ROUTER, no installation of driver is required. All you need to do is plug-and-
play and 6 Wifi-enabled devices can be connected simultaneously.
2.1 Install HSPA+ Mobile Router for Ethernet connection
After connecting HSPA+ MOBILE ROUTER by USB, please refer installing steps below.
1. Open battery cover and take out battery
to insert SIM card.
2. Put in the battery.
3. Push to turn on the device.
4. Double click “Computer”
5. Click “CD Drive (HSPA+ Router)”
6. Open “Setup” folder
7. Double Click “Setup.exe”( ) to
install driver.
8. Re-plug-in the device to finish installing.
9. After installing, the icon ( ) which is quick link to connection manager will appear
in the desktop.
10. You can also enter “http://192.168.1.1.” on browser to link connection manager.
(refer to “3. Connection Manager” as below)
2.2 HSPA+ Mobile Router for Wi-Fi connection
You do not need to install anything to connect HSPA+ MOBILE ROUTER by Wi-Fi.
1. Open battery cover and take out battery to insert SIM card.
2. Put in the battery.
3. Push to turn on the device.
4. Click on the AirPort icon displayed on your device and connect to SSID “HSPA+
Mobile Router”.
5. You can now connect to your 3G network