User Manual

- 2 -
1. AW-NM388 WLAN & Bluetooth MFG Tool Command User Guide
Figur1
 When you test AW-NM388, AW-NM388 module put in socket and please connect the B type
USB. It is necessary for two issues. One is for Bluetooth UART to USB interface control and
the other one is apply the voltage for 32.768KHz OSC.
1.1 Step1: Environment set up(Win XP English Ver. is necessary)
(1) Plug the USB cable in the host PC.
(2) Copy the file “sd8787.sys” from the sub folder below:
\MFG-8787-WIFI-SD-BT-SD-WIN-X86-1.2.6.22-14.0.3.p155\bin\lab_tool\drv\WinXP
(Please contact Azurewave FAE for the sub folder) and phase it into the sub folder below:
\Windows\system32\drivers
As figure 2
BT Antenna
B Type USB connector
WIFI AUX Antenna
Antenna Port
WIFI Main Antenna
SDIO Interface