AW-NM383 IEEE 802.11 b/g/n Wireless LAN Module User Guide Version 0.1 Document release Date Ver. 0.
1. General Description 1-1. Product Overview and Functional Description AzureWave Technologies, Inc. introduces the first IEEE 802.11b/g/n WLAN module Card -AW-NM383. The module is targeted to mobile devices including Personal Digital Assistants (PDAs), Netbook, TV, Tablet and Gaming Device which need small package module, low power consumption, multiple interfaces and OS support.
1-2. Key Features Small footprint: 35mm(L) x 40mm(W) 4 x 5 mm(H) SDIO interfaces support for WLAN W Cellular phone co-existence support Multiple power saving modess for low power consumption IEEE 802.11i for advanced seecurity Quality of Service (QoS) supp port for multimedia applications Drip-in WLAN Linux driverss are Android ready and validated on Android based systems. Support for Linux kernel verrsions up to 2.6.32. Support for BlueZ v4.
2. Specifications Table Product Description Wireless LAN Module Card WLAN Standard IEEE 802.11b/g/n, Wi-Fi compliant Host Interface SDIO / G-SPI for WLAN Major Chipset Marvell 8782 Dimension 40mm x 35mm x 5.0mm Operating Conditions Voltage 3.3V +/- 10%, 1.8V +/- 10% Temperature Operating: -20 ~ 70oC ; Storage: -40 ~ 85oC Electrical Specifications Frequency Range 2.4 GHz ISM radio band 802.11b: USA, Canada and Taiwan – 11 Most European Countries – 13 France – 4, Japan – 14 802.
Step1: Power on notebook PC and choose Ubuntu OS. Step2: Plug in USB cable to connect DUT and notebook PC. Step3: Open terminal and key in commands. Password is “000000”.
Step4: Select below interface and connect to your AP. You can do further RF set up by using command “iwconfig”. Ex. sudo iwconfig –h. You can see how to set up by different commands.
Federal Communication Commission Interference Statement 2-4. SDIO Host Interface Specifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may Referred from Marvell hardware specifications cause undesired operation.
Industry Canada statement: 3. Dimension: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TBC Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 6100A-NM383”.
