WWW reweave com = Azure Wave Reweave Tautologies, Ind AW-NM230NF-H IEEE 802.11 b/g/n Wireless LAN and Bluetooth inspired P Combo M.2 1216 Module User Guide Document Date Modification Initials Approved release Version 0.1 | 2015/03/10 | Initial Version Chan Lee Amos Fu Version 0.2 2015/8/3 | Add pin definition, pin map Chan Lee Amos Fu 1. ELAN Basic Test Driver Installation Throughput Test RF Tx/Rx Performance Test 2. Bluetooth Basic Test Download Mini-driver Throughput Test RF Performance Test 3.
= Azure Wave Agreeing Technologists, ne WWW. gzurewove.com 1. ELAN Basic Test **Must connect USB to PC Driver Installation DRIVER INSTALLATION {IN LINUX) First prepare the Broadloom's Linux package, and put it in the “home*folder. *Open the Terminal, enter the command: suds su and password. enter ed /home/username/drivernamea/src/dhd/linux s Enter make dd-cdc-sdmmc-gpl to generate the dhd.ko file in /home/username/ driver name *Enter Ins mod /(path of dhd.
= Azure Wave Agreeing Technologists, ne WWW. gzurewove.com » SUBSIDE: B2:51:28:6B:3C:A1 Capability: IBIS © Supported Rates: [ 1(b} 2(b) 11(b}] CONNECTING TO AN INFRASTRUCTURE NETWORK WITH NO SECURITY (AP CONNECTION} To connect to the network through an AP with SAID = Evaluate Run wl join Kalevala. CONNECTING TO AN INFRASTRUCTURE NETWORK WITH WEP SECURITY To connect to the network that uses 12345 as the network key © Run wl join Kalevala key 12345.
inks WWW reweave com = Azure Wave Note: © The STA automatically transitions to Legacy PS mode when no data is being sent or received. » The STA automatically disables PS mode when data is being sent or received. MEASURING ELAN THROUGHPUT The throughput measurement shows the performance of the TCP/IP layer over the wireless link. To achieve the best results, run the measurement test in a clean environment with as little interference as possible .
inks WWW reweave com = Azure Wave port of the AP 3. Verify that communication exists between the reference computer and the AW-NM230NF-H demo board by pinging 192.168.1.100 from the AW-NM230NF-H host console. 4. Set up Chariot. a. On the host computer, activate End Point: b. Using Chariot Console on the reference computer, create two pair groups (192.168.1.100 and 192.168.1.110} using the Chariot Throughput script. Run the throughput test for a specified period of time and observe the results.
WWW reweave com = Azure Wave Jw physiological 1 ./wl scan suppress 1 Jw! chain 1 Jw! resentments ./wl counters This will enter Channel 7 receive mode. 3.The default MAC address is 001122334455. Packets sent from Signal Generator must have the same MAC address as the UT's MAC address (Run time mac address can be overrode by using wl furtherance Xx:XX:XX:XX:XX:X . 3%. Use counters” and find the received frame numbers in “rxdfrmocast”. 3K.
WWW reweave com = Azure Wave Reweave Tautologies, Ind He i IDE STAIR TOE ae [EEL Ls BIH as SO Nevi nod nourishment PTH Demitasses. ECHO NEE BERG + EEE PER SEES Col on LET | rot SR Sheri Com Pon OMS) c. In the Baud list, type 115200. d. Select the CTS flow control check box. e, Click OK. 5. In HCI Control, select the HCI protocol active check box a CE Fae es protocol suite Hua: Lie 20063115200; 17:55:280 pen; ++ Transistorized Swe 5200.
= Azure Wave Reweave Tautologies, Ind 7. On the Transport menu, click Download Reconfiguration. 8. In Select Download Reconfiguration Transport: iz Tania ua ms © Domino f TE Gnomish cen £22 Fn iii 0 a. Select ART as the type of transport. b. In the COM port list, select com. ¢. In the Baud list box, type 115200. d. Select the CTS flow control check box. e. Click OK. 9. In Download, configure the settings to match those shown below 10. Click Execute. 11.
WWW reweave com = Azure Wave Throughput Test Blue tool contains a throughput test feature that can be used with two or more AW-NM230NF-H devices. Note that each device runs on a separate PC with Blue Tool installed. This document will provide basic directions for setting-up and running this test. The next step in setting-up the test is establishing a connection between the devices.
