User's Manual

3-11
point.
 Disable: no network/password key is required for joined wireless station.
z Authentication
The next generation of Wi-Fi security, Wi-Fi Protected Access, or WPA, will use
authentication to verify whether users have access to a particular wireless network.
 Open system: This access point is without authentication protection with user.
 Share key: Any station would join this access point should pass with key same as the setting on
access point.
z Back
Go back to previous step ~ Setup a Wireless Network.
z Next
Go to next step. It depends on the setting of WEP and Authentication.
Authentication
Encryption
Open system Shared key WPA-PSK
WEP WLAN Security
WEP(Disable) Show Network Setting n/a
z Cancel
Give up current WiFi-AP Solo Wizard setup and roll back to previous configuration.
Wireless Network Security
Two types pass key, ASCII and Pass phrase, perform security with different level.
z ASCII
You should provide either 5 or 8 ASCII characters on Network key edit box.
z PASSPHRASE
You could input words on Network Key edit box.
 64 bits: The generated pass key is 64-bits to be company with data packets.
 128 bits: The generated pass key is 128-bits to be company with data packets.
z Back
Go back to previous step ~ Wireless Network Properties
z Next
Go to next step ~ Show Setting Information
z Cancel