User Manual

Pre-Shared Key Security
To use Pre-Shared Key (static WEP) security In the ACU, access the Security tab in the
Profile Management window.
1. In the ACU, edit the security settings by clicking New or Modify on the Profile
Management tab.
2. Choose a profile to edit, or name the new profile in the Profile Management window.
Enter the SSID of the AP the STA connects to.
3. On the Security tab, choose Pre-Shared Key (Static WEP).
To enable Pre-Shared Key security:
1. Click on the Security tab, and choose the Pre-Shared Key radio button. Click the
Configure button.
Figure 2-7. Define Pre-Shared Keys Configuration Window
2. Define the pre-shared keys and select the default key.
3. Click OK.
4. If the AP that the wireless adapter is associating to has WEP set to Optional and the
client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on
the Security Tab to allow association.
5. Click OK and enable the profile.
24