User Manual

LEAP Security
The LEAP authentication type uses Cisco Key Integrity Protocol (CKIP) and MMH
message integrity check for data protection. The client adapter uses the username and
password to perform mutual authentication with the RADIUS server through the AP.
To use LEAP security, access the Security tab in Profile Management.
1. In the ACU, edit the security settings by clicking New or Modify on the Profile
Management tab.
2. Choose a profile to edit, or name the new profile in the Profile Management window.
Enter the SSID of the AP the STA connects to.
3. On the Security tab, choose the WPA/WPA2 radio button.
OR: On the Security tab, choose the 802.1X radio button.
4. Choose LEAP from the drop-down menu.
To enable LEAP security:
1. LEAP security requires that all infrastructure devices are configured for LEAP
authentication. Check with the IT manager.
2. If supported, choose LEAP from the drop-down menu on the right, then click the
Configure button.
Figure 2-5. LEAP Configuration Window
3. Specify a user name and password:
– Select to Use Temporary User Name and Password by choosing the radio button Check
21