User Manual

PEAP-xxxxxxxxxxxx, where xxxxxxxxxxxx is the computer's MAC address. Change the
login name if needed.
8. Click OK.
9. Enable the profile.
To enable PEAP (EAP-MSCHAP V2) security:
1. To use PEAP (EAP-MSCHAP V2) security, the server must have PEAP certificates,
and the server properties must already be set. Check with the IT manager.
2. If supported, choose PEAP (EAP-MSCHAP V2) from the drop-down menu on the right,
then click the Configure button.
Figure 2-4. PEAP (MSCHAP V2) Configuration Window
3. Select the appropriate certificate from the drop-down list.
4. Specify a user name for inner PEAP tunnel authentication:
5. Check Use Windows User Name to use the Windows user name as the PEAP user
name.
OR: Enter a PEAP user name in the User Name field to use a separate user name and
start the PEAP authentication process.
6. Click Advanced and:
19